Terug naar het overzicht

Millutensil MiL263 Die & Mould spotting press Try-out moulds MACH4METAL REIS TUS 7241

Deze machine is verkocht

Ga naar: Machine alert

Hydraulische pers Millutensil - MIL 263

MACH-ID 7241

Merk:	Millutensil
Type:	MIL 263
Besturing:	Siemens TOUCH 277
Bouwjaar:	2014

Vraag via Whatsapp

Table load lower table 46.000 Kg
Table load upper table 20.000 Kg
Minimum Die height 300 mm
Maximum Die height 2400 mm

Equipped with options
Tilting table 180 Gr
Electric paralel control system
X-travel lower base extensions to 2000 mm

Specificaties

Metrisch US Standard

Afstand tussen de kolommen 2130 x 2730 mm 2130 x 2730 inch

Inbouwhoogte 2400 mm 94.488 inch

Tafellengte 2500 x 2000 mm 2500 x 2000 inch

Slagverstelling 2100 mm 82.677 inch

Aanloopsnelheid 80 mm/min. 80 mm/min.

Werksnelheid 8 mm/min. 8 mm/min.

Return speed 50 mm/min. 50 mm/min.

Tafel draaisnelheid 180 U/mm 180 U/mm

Afmetingen (Schatting)

Lengte 7800 mm 307.086 inch

Breedte 5600 mm 220.472 inch

Hoogte 6510 mm 256.299 inch

Gewicht 56000 kg 123514.7 lbs

Belangrijk: De informatie op deze pagina is naar beste vermogen en overtuiging verkregen en waar nodig verkregen van de fabrikanten.De nauwkeurigheid kan niet worden gegarandeerd maar de informatie wordt te goeder trouw gegeven. Dienovereenkomstig vormt het geen vertegenwoordiging of contractuele voorwaarden.We raden u aan om alle essentiële details te controleren!

Deel op

Downloads

Download alle foto's Brochure

Millutensil ML Brochure Blue line.pdf

Deel op

The MiL 263 spotting presses for assembly, adjustment, check and reapir for large moulds.

This press is used for splitting, adjusting, maintenance and try-out operations

on dies and moulds (thermoplastics, die casting, thermosetting, rubber and blanking)

The lower table is build in floor pit version

The die & mould spotting presses of the traditional MIL series feature the extensible plate exit on the side, towards the short side of the distance between columns. They are typically used in the plastics, rubber and die casting sectors.
This solution allows tilting on the extensible plate short side up to 70° on both sides. In this version, the upper plate, too, is tilted on the short side from 100° to 180°.

The MIL series provides great advantages compared to other solutions with long side rotation

Better working ergonomics, granting the operator to have easy access to any mould part without the use of platforms;
Much shorter total press height above ground, which often reduces excess costs for foundations;
Wide base press structure with greater stability;
The two mould-halves are located on the same side, so operators have an overview of the whole mould and can work more comfortably

Recent bekeken machines

Terug naar overzicht

Center draaibank COLCHESTER - MAGNUM 1250 Conventionel lathe Ø 635 x 3000 mm